DF-SLS200 3D Printer
DF-SLS200 3D Printer
Working principle
The 3D printer will lay a thin layer of plastic powder on the print bed, then the laser will melt the plastic powder in the designated area according to the design file, and then repeat the process layer by layer until the 3D object is completely created. Because the powder is laid down layer by layer on a powder bed, objects 3D printed using SLS technology do not require any support structures and are capable of extremely complex geometries.
Materials
Wood plastic, bamboo plastic, straw plastic, rice husk plastic, nut shell plastic and other biomass materials, stone plastic, coated sand, wax powder, low temperature nylon, polycaprolactone, polyether ether ketone, PSb, etc.
Working principle
The 3D printer will lay a thin layer of plastic powder on the print bed, then the laser will melt the plastic powder in the designated area according to the design file, and then repeat the process layer by layer until the 3D object is completely created. Because the powder is laid down layer by layer on a powder bed, objects 3D printed using SLS technology do not require any support structures and are capable of extremely complex geometries.
Materials
Wood plastic, bamboo plastic, straw plastic, rice husk plastic, nut shell plastic and other biomass materials, stone plastic, coated sand, wax powder, low temperature nylon, polycaprolactone, polyether ether ketone, PSb, etc.
◎ Divided into wood plastic, bamboo plastic, rice husk plastic, straw plastic, stone plastic.
◎ Strong adaptability; Strong versatility; Stable performance.
Performance Analysis - Mechanical Properties, Dimensional Accuracy, Warpage
| Performance | Wood plastic composite powder | |||
| Prototype | Waxed | Resin | ||
| Mechanical properties | Stretch | 4.85 MPa | 6.41MPa | 11.21MPa |
| Bending | 8.22 MPa | 10.50MPa | 20.79MPa | |
| Impact | 1.41KJ/m2 | 1.57KJ/m2 | 4.53KJ/m2 | |
| Size deviation | X | 0.18% | 0.21% | 0.23% |
| Y | 0.2% | 0.23% | 0.26% | |
| Z | 2.13% | 2.15% | 2.18% | |
| Warping（Z) | 0.11mm | 0.12mm | 0.25mm | |
PARAMETER
| Model | DF-SLS200 |
| Dimensions | 1030mm（L）*815mm（W）*950mm（H） |
| Build Volume | 200mm*200mm*200mm |
| Laser | 30W CO2 Laser |
| Layer Thickness | 0.08mm-0.4mm |
| Scanning speed | 2000mm/s |
| Data Format | STL generic post-slicing file |
| Power | 220VAC, 50/60Hz, peak 2.5KW, two-phase three-wire |
| Build Cavity Temperature | 100°C |
| Ambient Temperature | 15 - 30℃ |
| Materials | Wood plastic, bamboo plastic straw plastic, rice husk plastic, nut shell plastic and other biomass materials, stone plastic, coated sand, wax powder, low temperature nylon, polycaprolactone, polyether ether ketone, PSb, etc. |
| Forming Method | SLS |
| Molding Accuracy | ±0.2mm |
| Paving time | <8s |
| Software Work Platform | WindowsXP/2000 |
Get the Best Quote!
Please feel free to contact us for any inquiries, we will get back to you shortly.
Featured products
